Galvanized steel pipe bend, steel pipe bend for sale

Pipe Bends- 3D, 4D, 5D, 6D, 10D Bend & Elbows

Steel pipe bends are used to curve pipes into a different direction. Opposed to the elbows, bends have gradual curvatures. These bends are used to connect pipes of different diameters, Which are available in various specification, grades, shapes and thickness.

1. What is the difference between Pipe Bends and Pipe Elbows?

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

2. Steel Pipe Bend Degrees

3. Steel Pipe Bends Specifications

TYPE : SEAMLESS / WELDED/ FABRICATED
Offer: Minimum Wall Thinning rate & Ovality, No Wrinkles
Mill Test Certificate as per EN 10204 / 3.1B With NACE MR 01 75
Available Radius : 2.5D, 3D, 4D, 5D, 6D, 10D , 22D.
Bending angle (θ): 15 Deg, 22 Deg, 22.5 Deg, 30Deg, 45 Deg, 60Deg, 90 Deg, 135 Deg, 180 Degree Elbow or custom.
Manufacturers of Steel Pipe Bends Size: Seamless 1/2 inch to 24 inch; Welded / ERW: 2 inch to 36 inch.

4. Cold Pipe Bending

Rotary Draw Bending: Pipe or tube is bent using a combination of dies and other various components working in a rotary action. This action draws the pipe or tube forward making the desired bend. Rotary draw bending can also utilize mandrels.
Mandrel Bending: A mandrel is placed inside the tube or pipe that is being bent, especially with thinner wall materials, to prevent defects that can occur in the piece’s bend such as rippling, flattening, or collapse.
Compression Bending: Bending a pipe or tube using a stationary die while a counter die bends the material around the stationary die.
Roll Bending: Used when large radius bends or curves are required, this method passes a piece of pipe or tube through a series of three rollers in a pyramid configuration to achieve the desired curve.